The Loose Wire System is designed for use within the adhesive layer under tiles or within a leveling compound under other floor finishes.
The Warmup Loose Wire System (also known as DWSWire) is designed to suit irregularly shaped rooms and rooms with many fixtures, since the heating cable can simply be maneuvered on the subfloor around fixtures with ease. The spacing of the cable can be adjusted to your requirements in the desired power output and to the layout of the room you are installing the system in. The Loose Wire is ideal for installation under ceramic or natural stone tiled flooring.
At only 1.8mm, the heating cable is the thinnest on the market – so it does not raise the floor height visibly. The small cross-section of the heating element allows it to be installed without the need for a layer of a self-levelling screed. Install a Loose Wire System with a tile adhesive layer under tiles or with a self-levelling compound under other floor finishes. Since installing Loose Wire does not require self-levelling screed, you do not lose any additional time or costs related to the drying of the system. Once the cable is laid down, the floor finish can be installed on top of it.
Please note that if you need a heated area over 5.9m2 then you will need to buy 2 or more of the existing systems to get to the desired size. EG if you have a 9.9m2 area you will buy 1 x DWS600 + 1 x DWS800 to get to the heated area.
This is a non stocked product, please enquire with regards to delivery times and availability.