Mape Mapeheat Mesh Self Adhesive Pre-Wired Underfloor Heating

In stock

  • Self-adhering, pre-wired, floor heating mesh
  • Easy to install under tile, stone, laminate, engineered wood and luxury vinyl floors (90w only).
  • Use with a self-leveller (recommended) or a polymer-modified adhesive.
  • Can be configured on site to fit any room.
  • Suitable for wet environments such as showers and steam rooms.
  • Low-profile cold lead and splice joint.

Delivery: Allow 2-3 working days

Product Options:


Mapeheat Mesh is a self-adhesive, pre-wired, floor-heating mesh that can be adhered onto the subfloor during the layout process. Its compatibility with all subfloor types and its low profile (4.5 mm) make it ideal for renovation projects.
Mapeheat Mesh can be installed under ceramic tile, porcelain tile, natural stone, laminate flooring, engineered wood flooring and luxury vinyl flooring.
Mapeheat Mesh’s heating cable is attached to the self-adhesive mesh layer by three mesh bands. These bands help to maintain consistent spacing of the cable while allowing easy removal of the cable during installation in hard-to-reach areas. Thanks to its twin coil design, the PVC-coated heating cable emits no measurable electromagnetic fields. Plus, the cable features a thin mechanical splice and a thin, flexible, 13.05m cold lead that is easy to embed in the subfloor and route to the thermostat’s location.

Mapeheat Mesh is available in various sizes from 1m² to 12m², dependent on wattage selected.

Black heating wire attached to a red mesh.
Length: 2mm - 24m, dependent on wattage selected
Width: 0.5m
Material: Self-adhering fiber glass mat
Thickness: 3.5mm

Operating voltage 230 V
Power output 90w/m² or 160w/m²
Minimum bending radius 12mm
Minimum cable spacing 75mm
Maximum storage temperature +90ºC
Minimum installation temperature +10ºC
Heating cable 2-wire, grounded, twisted pair with PVC outer jacket
Cold lead 2-wire, 16-18 AWG plus ground braid; length of 10 ft. (3.05m)

Mapeheat Thermo Connect thermostat WiFi-enabled floor-heating thermostat. This programmable thermostat can be controlled using a mobile smart phone app (iOS and Android) or Web browser.

Mapeheat Thermo Touch thermostat Color touchscreen programmable floor-heating thermostat with intuitive user interface and energy usage information.

Mapeheat Thermo Basic thermostat Non-programmable thermostat for simple control of any
electric floor-heating system.

Mapeheat Fault Sensor Mapeheat Fault Sensor is used to verify the continuity of the heating cable and the integrity of its outer jacket during the installation process. The device connects to the cold leads of the cable and, if the heating cable is damaged, the alarm on the monitor will sound. The monitor can also be re-used for subsequent installations and to help troubleshoot any problems that may arise.

Mapeheat Cable Repair Kit Mapeheat Cable Repair Kit can be used for repairing

Mapeheat Mesh’s heating cable if it has been damaged during installation.
Mapeheat Lead Wire Repair Kit Mapeheat Lead Wire Repair Kit contains all materials
needed to repair a damaged cold lead for Mapeheat Mesh

More Information

Brand Mapei
Area Indoors
Material Self adhering fiber glass mat
Type Heating Mats

Technical Info


Product Questions