Ardex E 90 Admix Improve Cement Based Tile Adhesive 3.6 kg

In stock | | 2-3 Working Days

  • For use with ARDEX X 7G, X 7W, and S 21 cement-based tile adhesives
  • Improves adhesion when fixing fully vitrified tiles, porcelain and mosaics etc.
  • Improves flexibility
  • For internal or external use
  • Eliminates the need to prime when fixing onto existing glazed surfaces
  • For use when tiling to heated subfloors

Description

ARDEX E 90 is a special synthetic dispersion for use with ARDEX X 7 G, ARDEX X 7 Wand ARDEX S 21 cementbased adhesives. ARDEX E 90 is diluted with an equal volume of water prior to
mixing with the ARDEX adhesive powder. The addition of ARDEX E 90 produces a mortar that, once set and hardened, has high adhesive strength, elastic and water repellent properties.

The mixed mortar has the same properties as the normally mixed ARDEX adhesive mortar; workability, slump resistance, high initial grab, open time, etc. The substrate preparation follows the recommendations given for the ARDEX adhesives, except that glazed surfaces do not require priming, though they must be clean and free of barrier materials. The improved mortar is especially effective in the following situations:-

Fixing large flat-backed tiles and slabs as well as smooth backed, dense and impervious ceramics, vitreous mosaics, etc.

Direct fixing of ceramic tiles onto existing glazed surfaces.

ARDEX X7G or X7W/ARDEX E 90 mortar can be used for internal or external applications and is useful to inhibit the formation of lime bloom and efflorescence on external tiling.

ARDEX S21/ARDEX E 90 mortar is ideal for bedding large flat backed and/ or smooth dense tiles and for providing water repellent bedding where required.

ARDEX S21/ARDEX E 90 mortar may also be used for applications to existing smooth impervious surfaces.

Suitable for External Use or Wet Areas
Yes, including swimming pools

Suitable for Use with Under Tile Heating
Yes

Coverage
3.6kg of ARDEX E 90 is sufficient for approximately 20kg of ARDEX S 16
2kg of ARDEX E 90 is sufficient for approximately 22kg of ARDEX S 21

More Information

MPN 18472
Brand Ardex
Area Internal | External
Material Other Materials
Size 3.6 kg
Type Primers-Admixes
Width (mm) 0

Technical Info

Delivery Costs:

Delivery fees are calculated based on the weight of your order and your delivery location. You can use the delivery fee calculator in your basket or on the checkout page to find the exact cost.


Delivery Area:

We currently only deliver to UK Mainland and the Highlands. We do not deliver to the Islands, Ireland, or Northern Ireland.


Next Working Day Delivery (Subject to Stock Availability):

Orders placed before 12:00 pm (noon) will be delivered the next working day, excluding weekends and holidays. This service starts from £6.50 (including VAT) and the final cost is based on the weight of your order and your delivery location. You can check the exact cost in your shopping cart or on the checkout page by entering your postcode.


Cut-off Time for Genesis Products (Non-Stocked): 11:00am


Economy Service (2-3 Working Days):

This service is only available for orders over 50kg. There is no additional charge for this service.


Sample Orders:

All sample orders are shipped for free via Royal Mail Tracked 48 or 24 service. Delivery typically takes 1-3 working days.


Delivery Methods:

Non-sample orders under 50kg will be dispatched via DPD or APC Overnight. Non-sample orders over 50kg (quarter, half, and full pallets) will be dispatched via Palletways or Kandrmason.


ORDER ONLINE & COLLECT IN-STORE!

Simply place your order online and choose the Click & Collect option at checkout.
We'll email you once your order is ready for pickup at your chosen store.
Collection hours: Monday - Friday: 8:30 am to 4:30 pm


For more information, please visit our Delivery Information page.

- Please inspect your order for any damages upon delivery and notify us immediately if you find any.

- We will replace any items that are damaged during transit.

- We accept returns within 30 days of delivery.

- Please note that customers are responsible for the cost of returning items.

- We will process returns and refunds promptly once the items are received at our warehouse.


Returning Trims
Schluter Trime
Returning trims - 35% restocking fees applied.
Returnign trim with replacement - 15% restocking fees applied
Customers are responsible to arrange returning the item.
If we arrange a return colleciton, a £35 return item collection feed will be applied.


Mapei-Profilpas Trims
A 20% restocking fee will be applied. (Item must be in re-sellable condition)
The customer is responsible for returning the item.


For more information, please visit our Return & Exchange page.

Reviews

Product Questions