ARDEX PSRS is an ultra-low viscosity, solvent free, two component, epoxy resin; designed for strengthening and restoring poorly compacted and low strength screeds that do not meet the required in-situ crushing resistance value when tested. ARDEX PSRS penetrates into the defective screed, filling voids resulting from poor compaction and consolidating loose  articles. The cured resin filled substrate will provide a high strength screed that meets the highest soundness category given in BS 8204-1 for in-situ crushing resistance. It is most useful in biologically sensitive areas where the removal of the screed will impact on the surrounding environment.

Mixing ratio
2.52:1

Density
1.08kg (mixed)

Pot life
approximately 10 minutes

Working time
approximately 20 minutes

Over coating
4-24 hours

Walkability at 20°C
after approximately 4 hours

Unit Size Available: 10kg

Coverage: Refer to product datasheet.