BAL FLEXBONE VAried is a high load bearing, waterproof,  uncoupling membrane. Accommodates lateral movement for tile installations on floors with limited movement. Used as a system with a recommended BAL flexible cementitious adhesive.

Use for

Ideal for the Installation of large format ceramic and porcelain tiles, slabs & natural stone with a minimum edge length of 100mm.

Counteracts and therefore minimises tension stresses between the substrate and the floor to be installed.

Prevents reflective cracking caused by shrinkage cracks, board joints and lateral movement.

Provides crack bridging and allowing a safe installation onto challenging substrates.

Suitable for internal flooring; renovation and new construction, domestic and commercial areas in medium/heavy duty applications.

Suitable for use in most internal floor areas including bathroom and kitchen.

Recommended for heated floors, new cement screeds, timber floors and existing floor surfaces.

Restrictions: NOT suitable for

• Exterior environments
• Substrates with deflection (vertical movements).
• Use on parquet flooring.
• Bridging movement joints.
• Use with agglomerated stone tiles that exhibit a tendency to curl. Seek further guidance from the tile manufacturer.