Eco-friendly cleaner, ready to use, for removing residues and streaks of epoxy resins, ideal for use in Greenbuilding.

Fuga-Shock Eco has a specific cleaning action that removes residues and streaks from ceramic tile, porcelain tile and glass mosaic surfaces.

Areas of use
Use
To eliminate residues and streaks of Fugalite® from ceramic and porcelain tiles.
Substrates:
- ceramic, porcelain tiles
- glass mosaic

Do not use
On surfaces that are not resistant to basic agents. On marble and natural stone it is advisable to carry out a test in advance

Instruction for use

Preparation of substrates
The coating materials must first be cleaned to remove any dust. Fugalite® must be fully hardened.

Preparation
Fuga-Shock Eco is a ready-to-use transparent liquid. Shake the bottle well before opening in order to redisperse the liquid evenly.

Application
It is advisable to perform a preliminary test on tiles that are not to be laid, or in a concealed area. Apply Fuga-Shock Eco evenly to the
surface to be cleaned with a white rough scrubbing pad and leave it until the dirt to be removed begins to visibly lift; this may take a few
minutes or up to 3 – 5 minutes depending on the quantity, the elapsed time after laying (at least 7 days) and the degree of absorption of
the surface. Scrape the surface mechanically with abrasive felt pads. Once cleaned, rinse well and dry carefully. The use of wet vacuum
makes the operation easier and ensures the complete removal of residue. In the case of large surface areas, a mechanical buffer with
an abrasive felt pad for the removing operation is recommended. Repeat for highly stubborn dirt.

Cleaning
Residues of Fuga-Shock Eco can be cleaned from tools by rinsing them thoroughly with water.

Special notes:
Fuga-Shock Eco is a liquid detergent. Before using the product, it is advisable to hermetically seal all doors, windows, rubber seals,
furniture, varnished/painted elements, bathtubs and shower trays made of synthetic materials such as methacrylate, PVC, etc.. and any
surface that could be attacked through direct contact with the detergent or with vapours.

Appearnce	Transparent liquid
Sheld life	24 months
Warning	Protect from frost, avoid direct exposure to sunlight and sources of heat
pH	≈ 1.4
Temperature range for application	from +5 °C to +35 °C
Waiting time before cleaning with water	≈ 2 – 5 min
Coverage	≈ 10 – 20 m2 /1 ℓ