Mapei Latexplan Trade Self Levelling Smoothing Compound 25kg

Mapei Latexplan Trade Two Part Smoothing/Levelling Compound

• Latexplan Trade is used for levelling and smoothing differences in thickness of 3 to 10 mm (in one application) on new and existing substrates, to prepare them for any type of flooring installation.
• Latexplan Trade is suitable for areas subject to chairs with castors.
• Trade levelling and smoothing compound, protein-free with low odour and high compressive strength. For levelling or smoothing differences in thickness of 1-10 mm to receive all types of floor coverings. Slowerhardening - suitable for rubbing down.
• Suitable for underfloor heating. Suitable for use under MAPEPROOF 1K TURBO & MAPEPROOF ESM surface membranes.
• CONSUMPTION: approx. 6 m2 at 3 mm thickness.
• APPLICATION: smooth edged trowel or spiked roller.

TECHNICAL

Latexplan Trade is a two-part smoothing compound that consists of a grey powder (part A) containing special cements, graded silica sands and additives to be mixed with a synthetic rubber latex (part B).

Latexplan Trade can be walked on after approximately 1ó-2 hours and is ready for installing flooring after about 12 hours, depending on the thickness and the ambient temperature.

Latexplan Trade has a very low odour and this makes it suitable for use in confined and inhabited areas, where working and/or occupation must be maintained.

Suitable for use under a damp proof membrane such as Mapeproof ESM, where residual or static moisture is present. For the best results, Latexplan Trade should be mixed without extra latex or water being added.

STORAGE

Latexplan Trade part A has a storage life of approximately 12 months if stored in dry conditions.
Latexplan Trade part B has a storage life of approximately 24 months if stored in dry conditions and protected from frost.

TECHNICAL DATA

PART A

Consistency: Fine powder
Colour: Cement Grey
Dry solids content (%): 100
Bulk density (kg/m³): 1400
Flammable: No

PART B

Consistency: Runny liquid
Colour: White
Dry solids content (%): 9
Bulk density (kg/m³): 1.05
Flammable No

EMICODE: EC1 Plus - very low emission

Mixing ratio: 5 kg of Latexplan Trade liquid with 25 kg of Latexplan Trade powder
Thickness per coat: 3 mm to 10 mm
Density of mix (kg/m³): 2000
Application temperature range (°C): from +5°C to +35°C
Workability (at +23°C): 20 - 30 minutes
Setting time: 45 - 60 minutes
Set to light foot traffic: after 1½ - 2 hours
Time before laying floorcovering: 12 hours
FINAL PERFORMANCES
Compressive strength (N/mm ):
- after 1 day: 7
- after 7 days: 20
- after 28 days: 26
Flextural strength (N/mm ):
- after 1 day: 3
- after 7 days: 6
- after 28 days: 8

Resistance to abrasion after 28 days: 3 g