Mapei Proangle F Aluminium Profile External Corners 2.7m

Proangle F is a triangular profile presented as a decorative element, sealing the external corners in tile
coverings. The stainless steel version with a narrower base is recommended to protect and finish internal corners in tiled coverings. Special pieces are also available, such as internal/external angles and end caps in aluminium and stainless steel.

MATERIALS

Anodized aluminium
Al-Mg-Si aluminium, heat-treated in T6 (6060 T6).
The profiles are made by extrusion then anodized with a ≥ 15 µm thick layer.
The outer surface must be protected from scratches and rubbing. They present a strong resistance to
chemical and atmospheric agents. When wet, concrete and its derivatives produce alkaline substances which can corrode metal (forming aluminium hydroxide) when allowed to react with the surface. For this reason, the visible surface of the profile must be quickly and delicately cleaned to remove any concrete, adhesive or grouting substances and detergents.
Anodized surfaces can become ruined through wear and foot traffic (profiles used on floors) and the original finish lost as a result

Polished aluminium
Al-Mg-Si aluminium, heat-treated in T6 (6463 T6).
The profiles are extruded then treated and machined. Relatively good resistance to chemical and atmospheric agents is guaranteed. When wet, concrete and its derivatives produce alkaline substances which can corrode metal (forming aluminium hydroxide) when allowed to react with the surface. For this reason, the visible surface of the profile must be quickly cleaned to remove any concrete, adhesive or grouting substances and detergents. Do not use polished aluminium profiles on floors and outdoors.