Marmox Showerlay 360 Offset Point DrainWaterproofing Insulation

Completely impermeable to water and leak-proof.
Provides thermal insulation.
Fitted with a drain that swivels through 360°, allowing the outlet pipe to be fitted horizontally, vertically, or at any other angle as required. This offers greater flexibility to site conditions.
High flow rate of between 30–50 L per minute.
Features a height adjustable drain grate to match the height of thicker tiles (from 5-15 mm).
Pre-fitted with a frame designed to connect to adjustable drain units.
Lightweight to handle.
The compact drain is 80 mm deep, with a 50 mm water seal.
Ready for tiling.
Reinforced for extra support.
Can be cut down to size.
Can be used in conjunction with Marmox Multiboards on the walls and surrounding floor consult manufacturer for information.

Marmox floor level shower with point drain

Marmox Showerlay360 Point Drain is supplied with a traditional
square drain (point drain), with central and offset versions available.
*A full range of sizes is available in both square and rectangular
formats. Complete with a brushed stainless steel grate which can
be adjusted to accommodate tiling thicknesses of 5mm to 15mm

Easily create a sloping wetroom floor! Showerlays are a vital part of wet room shower kit, comprising pre-sloped flooring panels with integral drainage used to create 'level access' tiled shower areas.

Complete tiled wet rooms or simple shower areas are made using the Marmox system of a Marmox Showerlay, alongside our waterproofing products, which provides the drainage area beneath the shower head and Marmox Multiboard on the walls and surrounding floor.

Showerlay and Multiboard both provide an exceptionally stable 'decoupling' substrate to tile upon. They also provide thermal insulation and are completely impermeable to water, eliminating the risk of leaks.

If you are currently thinking through wet room design ideas, Marmox Showerlay 360 could be a perfect choice.

Marmox Showerlay 360 is available in many sizes and in two versions:

The 40mm thick version has a stylish brushed stainless steel linear channel drain.

The 20/24mm thick version has a square brushed stainless steel drain in various locations.

The height of the point drain is adjustable by screwing in the insert holding the grate frame. Remember, the height of the grate will be slightly higher than the height of the grate frame, so this should be accounted for when considering the height of the tiles which should be flush with the top of the grate, not the grate frame.

New universal drain

A new compact drain, at just 80mm deep with a 50mm water seal, has been developed to work with both our Showerlay bases. The gully can be adjusted to make the outlet pipe horizontal, vertical or any angle in between. Depending on the angle of the outlet pipe, the flow rate is 30 to 50 litres per minute. The versatility of this product makes it a valuable part of any wet room kit.