Bal Grout Colour Guide
BAL Grout Colour Guide
Grout is the “frame” around your tiles — it can make a tile look cleaner and larger, soften the overall look, or create contrast for a bolder, more defined finish. Use the BAL colour charts below to shortlist shades, then choose the right grout type for your joint width, room conditions, and tile material.
Colour tip:
Screen colours can vary. Always check your final choice in the room lighting (day + night) and, where possible, test a small area before committing across the full installation.
BAL grout colour charts
Click an image to open full size
How to choose the right grout colour
1) Match (tone-on-tone)
Choose a grout close to the tile colour to reduce visual “grid lines”. This is ideal for calm, seamless walls (showers, splashbacks) and modern large-format floors.
2) Contrast (define the pattern)
A darker grout with a light tile (or vice versa) highlights layout and grout joints. Great for metro tiles, herringbone, and feature walls where you want shape and rhythm.
3) Consider maintenance
Mid-tones are often practical for busy areas. In wet zones, keep up with regular cleaning to maintain a fresh, consistent finish.
Quick checklist before you decide
- Check your tile finish: textured/matt finishes can read differently next to grout than polished surfaces.
- Look at the joint width: wider joints make grout colour more noticeable.
- Review the room lighting: warm bulbs can soften greys; cool daylight can make creams look lighter.
- Try a small test area (or a spare tile board) and let it fully cure before final judgement.
BAL Grout Colour Reference
Snow (MM S2)
White (MM W1)
Jasmine (MM J1)
Manilla (MM M1)
Pebble (MM P1)
Hazel (MM H1)
Walnut (MM W2)
Mahogany (MM M2)
Pink Champagne (MM PC1)
Smoke (MM S1)
Dovetail (MM D1)
Gunmetal (MM G1)
Taupe Grey (MM TG1)
Storm Grey (MM SG1)
Anthracite (MM A1)
Ebony (MM E1)
Tornado Sky (MM TS1)
Cornflower White (MM CW1)
Peppermint (MM P4)
Primrose (MM P5)
Ivory
Grey
Charcoal
Limestone
Sandstone
Colours shown are approximations only — for best results view a physical swatch under your room’s lighting.
Which BAL grout should I use?
Browse BAL tile groutPick the grout based on joint width, setting time, and where the tiles are installed (dry areas, wetrooms, underfloor heating, or full immersion). Below are popular BAL options and when they’re commonly used.
Rapid setting • Flexible
BAL Micromax 3 Eco
For walls & floors • Wet areas • Pools
- Sets in 2–3 hours (at 20°C) for faster completion.
- For grout joints from 1mm to 30mm.
- Suitable for interior/exterior, dry or wet areas, including wetrooms and swimming pools.
- Example coverage (guide): 300×300×9mm tile, 3mm joint = 4.03m²/kg.
Coverage varies by tile size, thickness & joint width — use as an estimate only.
Everyday wall grout
BAL Grout Flex (Wall)
A flexible option for clean, neat joints on walls.
Popular colour range
White • Jasmine Cream • Light Grey • Mid Grey • Dark Grey
- Best for tidy, consistent lines where you want the tile finish to stand out.
- Consider mid/dark greys for feature walls and high-contrast layouts (e.g. metro tiles).
Floors & wider joints
BAL Tile Grout Flex (Wide Joint)
A strong choice where joint width is more visible and durability matters.
Popular colour range
White • Jasmine Cream • Light Grey • Mid Grey • Dark Grey
Coverage example (guide)
300×300×9mm tile • 3mm grout joints • 3.26m²/kg
Coverage changes with tile thickness and joint depth/width.
Colour combinations that work (fast ideas)
Light tiles
For a seamless finish, go with a light grout (white/cream/light grey). For definition, use mid/dark grey to outline the pattern—especially effective with metro and mosaics.
Mid to dark tiles
Matching grout reduces “busy” joints and can make the space feel larger. If you want contrast, keep it subtle (e.g. dark tile with mid grey) so it looks intentional rather than harsh.
Large-format floors
Matching or near-matching grout keeps lines minimal and modern. A slightly darker grout can add practical day-to-day forgiveness while still looking refined.
Feature walls
Contrast is your friend when you want the layout to pop. Use the chart to pick a shade that complements the tile undertone (warm vs cool) for a premium finish.
FAQs
Will grout look the same once it’s dry? Open Close
Grout can change as it cures. Always allow grout to fully set and dry before judging the final shade, and view it under the lighting used in the space.
Does joint width affect the look of grout colour? Open Close
Yes. Wider joints make the grout colour more prominent. If you’re using small tiles, mosaics, or a bold layout, consider whether you want the joints to blend in or create contrast.
Which BAL grout is suitable for wetrooms or pools? Open Close
BAL Micromax 3 Eco is suitable for dry or wet areas and full immersion including swimming pools, and it can be used internally or externally.
How do I estimate how much grout I need? Open Close
Use coverage as a guide and match it to your tile size and joint width. For example, BAL Micromax 3 Eco shows different m²/kg values depending on tile and joint size. Always add a little extra for waste, uneven substrates, and deeper joints.
Ready to choose your BAL grout?
Use the charts above to shortlist colours, then pick the grout type that fits your joint width and installation area.
