DEVIreg™ 130 is equipped with a wire (floor) sensor used for control of Comfort Floor
Heating applications. The thermostat has a dial for adjusting the temperature setting with a
numeric scale from , to 5 (meaning from OFF, 5 °C to 45 °C and each step corresponds
to approx. 9 °C). This type of thermostat can be used for outdoor applications too – Ice and
Snow Melting on Ground, Frost Protection on Roofs, Pipe Tracing, etc., because it doesn’t
have wire sensor failure monitoring.

Technical Information
Operation voltage: 220 - 240 V, 50/60 Hz
Standby power consumption: Max. 5 W
Resistive load Max 16 A (3680 W) @ 230 V
Inductive load Max. 1 A, cos φ = 0,3
Hysteresis ± 0,2°C
Ambient temperature -10 °C to +30 °C
Frost protection 5 °C -
Cable specification max 1 x 4 mm2 or 2 x 2,5 mm2
Ball pressure test temperature 75°C
Pollution degree 2 (domestic use)
Controller type 1 C
Storage temperature -20 °C to +65 °C
IP class IP 30
Protection class Class II