Free UK Delivery

Next Day, on all orders over £450

Free Samples

Order up to 4 free samples

Next WORKING Day Delivery

Order Before 12:00pm

Non stock item

Schluter DITRA-HEAT-MA-PS Peel & Stick Uncoupling Mat

In stock |

  • Anchoring fleece with pressure sensitive adhesive
  • Quick and easy to install
  • Easy to reposition during installation
  • Suitable for many substrates (eg. plywood, P4 & P5 chipboard, tile backer boards)
  • Saves time and materials
  • Immediately load bearing after installation
  • Uncouples the covering from the substrate
  • Easy installation of matching heating cables
  • Also available as DITRA-HEAT-DUO-PS with additional impact sound insulation and faster heat up response

Product Options:

Description

  • Anchoring fleece with pressure sensitive adhesive
  • Quick and easy to install
  • Easy to reposition during installation
  • Suitable for many substrates (eg. plywood, P4 & P5 chipboard, tile backer boards)
  • Saves time and materials
  • Immediately load bearing after installation
  • Uncouples the covering from the substrate
  • Easy installation of matching heating cables
  • Also available as DITRA-HEAT-DUO-PS with additional impact sound insulation and faster heat up response

Schlüter-DITRA-HEAT-PS is a polypropylene membrane with a cut-back stud structure and a fleece covered in pressure sensitive adhesive laminated to the underside.

It is a universal substrate for tile coverings that forms an uncoupling and vapour pressure equalisation layer and can also be used to attach the electrical heating cables Schlüter-DITRA-HEAT-E-HK.

The system is intended to be installed as a secondary heat source to provide added comfort for tile and stone surfaces.

DITRA-HEAT-PS is exclusively intended for installation on floors in interior areas. Substrates for installing DITRA-HEAT-PS must be flat, clean, dust free, dry, smooth, rigid and load bearing, with no deflection. To install, peel the release film off DITRA-HEAT-PS and place the membrane on the substrate. It can be lifted and re-positioned providing no pressure has been applied to it. However once pressure has been applied the adhesive sticks the membrane firmly to the substrate. The heating cables can be installed immediately after adhering the membrane, using a spacing of 9 cm (every third stud ≙ 136 W/m²).

The tile covering is installed directly over DITRA-HEAT-PS in accordance with the applicable regulations, using the thin-bed method. The cementitious tile adhesive bonds with the cut back stud structure of the DITRA-HEAT-PS membrane.

DITRA-HEAT-PS is waterproof and suitable for use in wet areas, provided the abutting joints are sealed with Schlüter-KERDI-KEBA and Schlüter-KERDI-COLL-L. The product does not have ETA or abP certification. If ETA or abP certification is required, we recommend use of the original Schlüter-DITRA-HEAT which is bonded to the substrate with cementitious tile adhesive.

Use the cable tester Schlüter-DITRA-HEAT-E-CT to measure the resistance of the electrical heating cables DITRA-HEAT-E-HK and the remote sensors supplied with Schlüter-DITRA-HEAT-E thermostats. The testing device should be used to monitor the resistance of the heating cables during the entire installation phase and alerts the installer with an acoustic signal in the event of damage. The cable tester automatically shuts down 60 minutes after the last key activation (values will not be saved).

More Information

Brand Schluter Systems
Material PP (polypropylene)
Pack Size Sheet, Roll
Type Tile Membrane

Technical Info

We found other products you might like!

tumbnail_1dd4ae29-2549-4289-bc12-8de3461b8d27
Schluter Ditra Heat-E-RT6 Smart Thermostat WiFi Voice Control 230V
£199.00
tumbnail_f4451e37-9f34-4156-9673-f3affa1aa140
Schluter Ditra Heat E HK Cable Underfloor Heating
As low as £73.04
Non stock item
tumbnail_b2643ac7-7088-4100-aed8-b784efe03610
Schluter Ditra 25 Mat Uncoupling Membrane
As low as £10.40

Delivery Costs:

Delivery fees are calculated based on the weight of your order and your delivery location. You can use the delivery fee calculator in your basket or on the checkout page to find the exact cost.


Delivery Area:

We currently only deliver to UK Mainland and the Highlands. We do not deliver to the Islands, Ireland, or Northern Ireland.


Next Working Day Delivery (Subject to Stock Availability):

Orders placed before 12:00 pm (noon) will be delivered the next working day, excluding weekends and holidays. This service starts from £6.50 (including VAT) and the final cost is based on the weight of your order and your delivery location. You can check the exact cost in your shopping cart or on the checkout page by entering your postcode.


Economy Service (2-3 Working Days):

This service is only available for orders over 50kg. There is no additional charge for this service.


Sample Orders:

All sample orders are shipped for free via Royal Mail Tracked 48 or 24 service. Delivery typically takes 1-3 working days.


Delivery Methods:

Non-sample orders under 50kg will be dispatched via DPD or APC Overnight. Non-sample orders over 50kg (quarter, half, and full pallets) will be dispatched via Palletways or Kandrmason.


ORDER ONLINE & COLLECT IN-STORE!

Simply place your order online and choose the Click & Collect option at checkout.
We'll email you once your order is ready for pickup at your chosen store.
Collection hours: Monday - Friday: 8:30 am to 4:30 pm


For more information, please visit our Delivery Information page.

- Please inspect your order for any damages upon delivery and notify us immediately if you find any.

- We will replace any items that are damaged during transit.

- We accept returns within 30 days of delivery.

- Please note that customers are responsible for the cost of returning items.

- We will process returns and refunds promptly once the items are received at our warehouse.


Returning Trims
Schluter Trime
Returning trims - 35% restocking fees applied.
Returnign trim with replacement - 15% restocking fees applied
Customers are responsible to arrange returning the item.
If we arrange a return colleciton, a £35 return item collection feed will be applied.


Mapei-Profilpas Trims
A 20% restocking fee will be applied. (Item must be in re-sellable condition)
The customer is responsible for returning the item.


For more information, please visit our Return & Exchange page.

Reviews

Product Questions