Schluter Kerdi Board V

KERDI-BOARD-V is a tileable substrate panel with vertical grooves, which make it possible to form it into curved designs. For example, you could create a curved shower wall, or relaxing spa bench. To give you the greatest possible flexibility for your project, KE

• Schlüter-KERDI-BOARD panels with vertical grooves are suitable for creating rounded and curved structures.
• The grooved panels are initially cut to the required size. If you need larger panels, you can simply combine several backerboards with double-sided adhesive tape.
• If the grooves are to face the inside, they should be filled with tile adhesive prior to shaping the structure.
• Exterior grooves should be filled with cementitious tile adhesive prior to or during the tile installation.

Schlüter-KERDI-BOARD is made of an extruded XPS rigid foam with a cement-free reinforcement layer and an anchoring fleece laminated on both sides. The upper face of the board is imprinted with 10 x 10 mm square gridlines.

Schlüter-KERDI-BOARD is waterproof and resistant to any chemical stresses that typically occur in conjunction with tiled coverings. Where required, a certified bonded waterproofing assembly can be created with KERDI-BOARD.

In floor areas, the use of KERDI-BOARD is restricted to areas with foot traffic. Depending on the system, stepping on such coverings with hard shoes or tapping them with a hard object may produce a hollow sound.

Store KERDI-BOARD on a flat surface or in another suitable form. When stored outside, the product must be protected against direct sun exposure and weather.