Kerakoll Refresher 1.5L Nourishing Wax to Renew & Protect Continuous Floors
Kerakoll Refresher 1.5L Nourishing Wax to Renew & Protect Continuous Floors
Non-Stock 2-4 Working Days
Trade account pricing available
Exclusive contractor & developer rates.
No minimum order required.
TileExperience Trade Account
Save up to 15% on thousands of products with exclusive trade pricing and dedicated account support.
| Type | After Care |
|---|---|
| Brand | Kerakoll |
Kerakoll Refresher
Nourishing, water-based wax designed to prevent wear and renew shine on continuous floors and a wide range of resilient and finished timber surfaces. Self-polishing, re-polishable, and ready to use.
Key benefits
- Renews and evens out shine for a cleaner, more uniform finish.
- Improves resistance to scratching and wear on continuous flooring systems.
- Self-polishing & re-polishable for easy ongoing maintenance.
- Ready-to-use — no mixing, no dilution.
- Apply with a soft cloth or microfibre wax applicator for a thin, even coat.
- Ideal for joint-free floors and high-traffic areas that need periodic refresh.
Where it’s suitable
Internal floors in domestic, commercial, and industrial environments.
- Continuous floors: Cementoresina, Microresina Parquet, Microresina Floor
- Varnished and oiled hardwood floors (traditional & pre-finished)
- Resilient floors: PVC, rubber, linoleum, vinyl
- Plastic laminate floors
Where it should not be used
- Untreated or unvarnished wood floors
- Marble, ceramic tiles, terracotta
- Absorbent floors (in general)
Tip: For best performance, always apply in a thin, even layer and treat the full surface to keep the finish consistent.
Application guidance
-
1) Prepare the surface
Wash thoroughly, rinse to remove residues, and allow to dry fully:
- Resilient floors: clean (and if needed, remove old films), then rinse and dry
- Wood & continuous floors: clean, rinse, and dry before application
-
2) Apply Refresher (ready-to-use)
Pour onto the floor in a wavy line (approx. 3–4 cm wide). Work in small areas (around 3 m²). Spread with a damp cloth or microfibre applicator in a thin, even layer.
Avoid drips, pools, or excess product. Minimise dust and air movement while the film is wet.
-
3) Dry & additional coats
Allow to dry for at least 1 hour before walking on the floor. Apply a second (and if needed third) coat after drying, changing direction between coats.
-
4) Cleaning & maintenance
- Clean fresh residue with water before it hardens.
- Once dry, removal of old or thick layers typically requires a dedicated wax-removing detergent.
- Re-apply in high-traffic areas whenever wear becomes visible to restore uniform sheen.
Important: Avoid aggressive pH cleaners (very acidic or very alkaline) and do not apply using cotton/sponge mops. Apply only on dry, sound substrates and protect from frost and direct sunlight during storage.
Technical details
Values typically referenced at +20°C, 65% RH, with no ventilation.
| Appearance | Whitish liquid |
|---|---|
| Pack size | 1.5 L bottle |
| Coverage | ≈ 15 ml/m² per coat |
| Drying time | ≈ 1 hour (before foot traffic) |
| Application temperature | +10°C to +30°C |
| Shelf life | ≈ 12 months (original sealed packaging) |
| Base | Water-based |
| Solvent content | ≤ 15 g/kg |
| Emissions / rating (summary) | Low emission VOC • Rating 4 (manufacturer classification) |
Coverage helper: At ~15 ml/m² per coat, a 1.5 L bottle covers approximately 100 m² per coat (or ~50 m² for 2 coats), depending on substrate and application thickness.
Always test on a small, inconspicuous area first to confirm compatibility and finish. Follow site conditions and good practice for surface preparation and ongoing maintenance.
UK Mainland & Scottish Highlands only
We do not deliver to Islands, Ireland or Northern Ireland
How is shipping calculated?
Shipping is based on your order weight and delivery location. Add items to your cart and enter your postcode to see the exact cost before checkout.
Some products supplied directly from our manufacturers (non-stocked brands) carry a separate delivery charge — this is shown clearly at checkout.
Free delivery on orders £450+ inc VAT
Tiles & tiling materials only · Free samples always ship free
Next working day delivery
Order before 12:00 pm · From £6.50 + VAT · APC Overnight or DPD · Under 50 kg
Not available weekends or bank holidays
No next-day to Scotland postcodes
AB · IV · KW · PA — please allow additional working days for these regions
Pallet delivery — orders over 50 kg
Semi, half or full pallet · Palletways or K & R Mason · Next working day
Kerbside delivery only — driver cannot bring goods onto the property
Supplier direct delivery (non-stocked products)
Some brands are shipped directly from the manufacturer and carry a separate delivery charge, shown at checkout.
Genesis (trims) — £19 + VAT · 1–3 days · cut-off 11:00 am
Marmox (mosaics, shower trays) — £15 + VAT · 1–3 days
Marmox (oversized backing boards) — £65 + VAT · 1–3 days
Schluter (trims) — £20 + VAT · 1–3 days
Bihui (trims) — £15 + VAT · 1–3 days
Free sample delivery
No minimum spend · Up to 4 free samples · Next working day
Free Click & Collect
Select Click & Collect at checkout to pick up your order from our Croydon warehouse. We'll send an email confirmation once it's ready — please wait for this before visiting.
Bring your order confirmation email or order number when collecting.
If someone is collecting on your behalf, they must have the order number and the name on the order.
Mon – Fri, 8:30 am – 4:30 pm. Closed weekends & bank holidays.
Tile Experience, 108 Beddington Lane, Croydon, London, CR0 4YY
Order tracking
Email or SMS sent by the carrier once your order is dispatched
30-day return window
Returns accepted within 30 days of delivery. You also have a statutory 14-day cancellation right from the date of receipt.
Items must be unused & in original packaging
Returned goods must be uninstalled, unaltered and in the same condition as received.
Installed or cut items cannot be returned
Once tiles or materials have been cut, altered or installed, no return or refund is possible under any circumstances.
How to start a return
Contact us first at info@tileexperience.co.uk or call 0208 689 4187. Send the item back with your name and order number. Return shipping is the customer's responsibility.
Refund to original payment method
Processed within 3–5 working days of us receiving and approving your return.
Original delivery charges are not refunded. If no refund after 15 business days, contact us.
Damaged or incorrect items
Report within 48 hours of receipt. Email info@tileexperience.co.uk with your order number and photos of the damage. Confirmed replacements are sent next working day at no charge.
Non-stocked brands — restocking fee may apply
Returns for Genesis, Marmox and Bihui carry up to a 20% restocking fee. Schluter trims: 35% standard return, 15% if returning with a replacement order.
Cancellations
Cancel before dispatch for a full refund including delivery. Cancel after dispatch by rejecting the delivery — refund for goods only, not the delivery charge.
-
